ralph lauren outlet online Aerosol sprayAerosol spray

Aerosol spray

Aerosol spray is a type of dispensing system which creates an aerosol mi ralph lauren outlet online st of liquid particles. This is used with a can or bottle that contains a liquid under pressure. When the container’s valve is opened, the liquid is forced out of a small hole and emerges as an aerosol or mist. As gas expands to drive out the payload,

some propellant evaporates inside the can to maintain an even pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets. Typical liquids dispensed in this way are insecticides, deodorants and paints. An atomizer is a similar device that is pressurised by a hand operated pump rather than by stored gas.

The concepts of aerosol probably goes as far back as 1790.[1] The first aerosol spray can was invented in Oslo in Novenmber 23 1927 by Erik Rotheim, a Norwegian chemical engineer.[1] The patent was sold to a US company for 100,000 Norwegian kroner.[2] The Norwegian Post Office celebrated the invention by issuing a stamp in 1998.[3]

In 1939, American Julian S. Kahn received a patent for a disposable spray can[4], but the product remained largely undeveloped. It was not until 1941 that the aerosol spray can was first put to good use by Americans Lyle Goodhue and William Sullivan, who are credited as the inventors of the modern spray can.[5] Their design of a refillable spray can dubbed the “bug bomb”, was patented in 1943, and is the ancestor of many popu ralph lauren outlet online lar commercial spray products. Pressurized by liquefied gas, which gave it propellant qualities, the small, portable can enabled soldiers to defend against malaria carrying mosquitoes by spraying inside tents in the Pacific during World War II.[6] In 1948, three companies were granted licenses by the United States government to manufacture aerosols. Two of the three companies still manufacture aerosols to this day, Chase Products Company and Claire Manufacturing. The “crimp on valve”, used to control the spray was developed in 1949 by Bronx machine shop proprietor Robert H. Abplanalp.[5]If aerosol cans were simply filled with compressed gas, it would either need to be at a dangerously high pressure or the amount of gas in the can would be small, and would rapidly deplete. Usually the gas is the vapor of a liquid with boiling point slightly lower than room temperature. This means that inside the pressurised can, the vapor can exist in equilibrium with its bulk liquid at a pressure that is higher than atmospheric pressure (and able to expel the payload), but not dangerously high. As gas escapes, it is immediately replaced by evaporating liquid. Since the propellant exists in liquid form in the can, it should be miscible with the payload or dissolved in the payload.

Chlorofluorocarbons (CFCs) were once often used, but since the Montreal Protocol came into force in 1989, they have been replaced in nearly every country due to the negative effects CFCs have on Earth’s ozone layer. The most common replacements are mixtures of volatile hydrocarbons, typically propane, n butane and isobutane. Dimethyl ether (DME) and methyl ethyl ether are also used. All these have the disadvantage of being flammable. Nitrous oxide and carbon dioxide are also used as propellants to deliver foodstuffs (for example, whipped cream and cooking spray). The valve can be preassembled with the valve cup and installed on the can as one piece, prior to pressure filling. The actuator is added later.

Modern aerosol spray products have three major parts; the can, the valve and the actuator or button. The can is most commonly lacquered tinplate (steel with a layer of tin) and may be made of 2 or 3 pieces of metal crimped together. Aluminium cans are also common and are generally used for more expensive products. The valve ralph lauren outlet online is crimped to the rig of the can, the design of this component is important in determining the spray rate. The actuator is depressed by the user to open the valve; the shape and size of the nozzle in the actuator controls the spread of the aerosol spray.

that uses a piston barrier system is often used for highly viscous products such as post foaming hair gels, thick creams and lotions, food spreads and industrial products and sealants. The main benefit of the piston barrier system is that is assures separation of the product from the propellant, maintaining the purity and integrity of the formulation throughout its consumer lifespan. The piston barrier system also provides a controlled and uniform product discharge rate with minimal product retention and is economical.

Another type of dispensing system is the bag in can system (or BOV “bag on valve”). This system separates the product from the pressurizing agent with a hermetically sealed, multi layered laminated pouch, which maintains complete formulatio ralph lauren outlet online n integrity so only pure product is dispensed. Among its many benefits, the bag in can system extends a product’s shelf life. The bag on valve, or ABS, is widely used by sun care marketers for its benefits: all attitude (360 degree) dispensing, quiet and non chilling discharge. They do not use compressed air, but rather other inert gasses.

There are two main areas of health concern linked to aerosol cans:

Deliberate inhalation of the contents to gain a high from the propellant

The piggy backing of more dangerous particles into the respiratory tracts1. ^ a b Bellis, Mary The History of Aerosol Spray Cans

2. ^ Kvilesj, Svend Ole (17 February 2003). “Sprayboksens far er norsk” (in Norwegian). Aftenposten. Retrieved on 6 February 2009.

3. ^ Image of the Norway Postage stamp

4. ^ Carlisle, Rodney (2004). Scientific American Inventions and Discoveries, p.402. John Wiley Songs, Inc., New Jersey. ISBN 0471244104.

6. ^ Core, Jim, Rosalie Marion Bliss, and Alfredo Flores. (September 2005) “ARS Partners With Defense Department To Protect Troops From Insect Vectors”. Agricultural Research MagazineVol. 53, No. 9 .